Email cannot be empty
Password cannot be empty
Email format error
Email cannot be empty
Email already exists
6-20 characters(letters plus numbers only)
The password is inconsistent
Email format error
Email cannot be empty
Email does not exist
6-20 characters(letters plus numbers only)
The password is inconsistent
75u white matte Thermal PP/Acrylic Water Base-Standard/58g White Glassine
The 75u White smooth PP film with heat sensitive coated which is a high-quality, specially treated material , offering enhanced printability and durability. With a weight of 60±10% g/m² and a thickness of 0.075±10% mm, it provides a sturdy yet flexible surface. The 58g white glassine liner offers a smooth, durable backing (0.055±10% mm thickness), ensuring strength and easy handling.
- Product Details
-
Download
Direct Thermal Label
Product Description
Permanent high-viscosity water-based acrylic pressure-sensitive adhesive for film has high viscosity, is suitable for a variety of substrates, and has excellent adhesion effects on a variety of material surfaces,with a peel adhesion of 8N/25mm (FTM 9) to stainless steel, which increases to 9N/25mm after 20 minutes at a 180° angle and 5N/25mm at 90° after the same duration. Not suitable for application on PVC surfaces. Bottles with small diameters and irregular surfaces or frequently squeezed are not recommended. A comprehensive labeling test must be conducted in the final use environment before applied. Suitable for low temperatures or rough surfaces. Usually used with films.
Product Parameter
|
Category |
Details |
|
Face Material |
Weight: 60±10% g/m² ISO 536 |
|
Thickness: 0.075±10% mm ISO 534 |
|
|
Material: White smooth PP film with heat sensitive coating |
|
|
Liner |
Weight: 58±10% g/m² ISO 536 |
|
Thickness: 0.055±10% mm ISO 534 |
|
|
Material: White glassine treated with super calender |
|
|
Slitting Width |
Based on Jumbo Roll |
|
Jumbo Roll Width |
1530mm/60.23inches |
|
Peel Adhesion |
Initial Adhesion: 8N/25mm FTM 9 st.st |
|
20 minutes Peel Adhesion on Steel at 180°: 9N/25mm, FTM 1 st.st |
|
|
20 Minutes Peel Adhesion on Steel at 90°: 5N/25mm or tear off, FTM 2 st.st |
|
|
Temperature |
Min. Application Temperature: 5°C |
|
Service Temperature: -15°C to 60°C (24 hours after Labeling) |
|
|
Shelf Life |
12 months, applicable only to the material delivered by Siga that has not undergone further processing. |
|
Storage Conditions |
Storage Temperature: 23±2°C |
|
Relative Humidity: 50±5% |
|
|
Storage area must be dry and clean. |
Product Features
Thermal Paper Face: The product has good performance on water, oil resistance and plasticizer resistance. It is suitable for the linerless paper thermal printing electronic scales and thermal printers. The initial viscosity and final viscosity of the product are high. Excellent viscous performance on packaging materials.
Acrylic Water Base-Standard: Permanent high-viscosity water-based acrylic pressure-sensitive adhesive for film has high viscosity, is suitable for a variety of substrates, and has excellent adhesion effects on a variety of material surfaces.
Product Advantages
Wide Compatibility for Versatile Application on Non-Polar Surfaces: Designed for strong adhesion on non-polar materials like PE and PP, this label is ideal for use on plastic films, cardboard, and other common packaging surfaces.
Long-Term Durability and Convenient Storage for Consistent Performance: Featuring a 12-month shelf life when stored under optimal conditions, this material retains its adhesive and structural qualities over time, ensuring reliable labeling even after extended storage.
Download
-
FDTPP75P-W58EP_.pdf
Download FDTPP75P-W58EP_.pdf
