Email cannot be empty
Password cannot be empty
Email format error
Email cannot be empty
Email already exists
6-20 characters(letters plus numbers only)
The password is inconsistent
Email format error
Email cannot be empty
Email does not exist
6-20 characters(letters plus numbers only)
The password is inconsistent
70g TOP Thermal paper/Hotmelt Rubber base-Frozen Adhesive/50g Blue Glassine
The 70g TOP Thermal paper is a high-quality, specially treated material , offering enhanced printability and durability. TOP Thermal paper without protective coating resistance to water,plastic,grease,scratch.With a weight of 70±10% g/m² and a thickness of 0.075±10% mm, it provides a sturdy yet flexible surface. The 50g blue glassine liner offers a smooth, durable backing (0.050±10% mm thickness), ensuring strength and easy handling.
- Product Details
-
Download
Thermal Paper
Product Description
General-purpose hot melt adhesive with high initial tack and excellent performance on many packaging materials,with a peel adhesion of 10N/25mm (FTM 9) to stainless steel, which increases to 12N/25mm after 20 minutes at a 180° angle and 7N/25mm at 90° after the same duration. Not suitable for application on PVC surfaces. Bottles with small diameters and irregular surfaces or frequently squeezed are not recommended. A comprehensive labeling test must be conducted in the final use environment before applied. Suitable for low temperatures or rough surfaces. Usually used with films.
Product Parameter
|
Category |
Details |
|
Face Material |
Weight: 70±10% g/m² ISO 536 |
|
Thickness: 0.075±10% mm ISO 534 |
|
|
Material: Top Thermal paper with protective coating resistance to water, rubbing, oil.And high temperature resistance. |
|
|
Liner |
Weight: 50±10% g/m² ISO 536 |
|
Thickness: 0.050±10% mm ISO 534 |
|
|
Material: Blue glassine treated with super calender |
|
|
Slitting Width |
Based on Jumbo Roll |
|
Jumbo Roll Width |
1530mm/60.23inches |
|
Peel Adhesion |
Initial Adhesion: 10N/25mm FTM 9 st.st |
|
20 minutes Peel Adhesion on Steel at 180°: 12N/25mm, FTM 1 st.st |
|
|
20 Minutes Peel Adhesion on Steel at 90°: 7N/25mm or tear off, FTM 2 st.st |
|
|
Temperature |
Min. Application Temperature: -15°C |
|
Service Temperature: -40°C to 40°C (24 hours after Labeling) |
|
|
Shelf Life |
12 months, applicable only to the material delivered by Siga that has not undergone further processing. |
|
Storage Conditions |
Storage Temperature: 23±2°C |
|
Relative Humidity: 50±5% |
|
|
Storage area must be dry and clean. |
Product Features
Thermal Paper Face: The thermal product is suitable for cold chain. It is recommended to test it before use to avoid any long-term exposure to an environment above 40°C or direct sunlight to protect product quality. The product is suitable for the occasions that are recurrently sold and discounted. After the label is printed, it cannot be placed in a place that is easily contaminated with animal and vegetable oils or chemicals, so as to avoid the barcode being unscannable.
Hotmelt Rubber base-Frozen Adhesive: General-purpose permanent rubber-based adhesive with excellent low-temperature viscosity, excellent adhesion effect on non-polar surfaces such as PE and PP, excellent convert performance, and excellent performance in refrigerated and slightly humid environments.
Product Advantages
Wide Compatibility for Versatile Application on Non-Polar Surfaces: Designed for strong adhesion on non-polar materials like PE and PP, this label is ideal for use on plastic films, cardboard, and other common packaging surfaces.
Long-Term Durability and Convenient Storage for Consistent Performance: Featuring a 12-month shelf life when stored under optimal conditions, this material retains its adhesive and structural qualities over time, ensuring reliable labeling even after extended storage.
Download
-
PDT70-B50FM.pdf
Download PDT70-B50FM.pdf
